Butted T Top Border

FOLLOW US:



Follow our tweets with Twitter

Home
Contact Us
Search Website

Aurifil Wholesale
ThreadsOnline Store
Subscribe to E-News
Our Blog
Facebook Page
Freebies

About Us
Machine Quilting
Photo Gallery
Customer Comments
Musings

Useful Links
Longarm Resources
Find a Quilter
Find a Tutor

How to add a Border      Mitred Border


How To Attach a Butted T-Top Border

                           

 

  1. Measure the longest sides of the quilt top first.  Take 3 measurements and use the average measurement unless there is more than 1 cm variation in the measurements.

     

  2. Do not take the measurements on the edge of the quilt as the seams may have opened a little and will give a false result. Instead position the tape measure approximately 20 -30 cm in from the edge at both sides. Take the third measurement through the centre of the quilt.

     

  3. If there is more than a 1cm variation in the measurements it means that the piecing seams are not even so go back to the quilt and adjust seams before adding the borders. 

    When your quilt sits & hangs flat you will be pleased that you took the time to do this!

     

  4. Cut the two long borders to the “average” vertical unit measurement and desired width.

     

  5. If it is necessary to join the strips to make a strip long enough for the border use a bias seam join. Bias seams create a diagonal line that tends to “trick” the eye so that the seam becomes less obvious.

     

  6. Stitch the borders to the quilt top by matching registration points - divide each length of border into quarters and pin match to quarter positions on quilt top. This helps to prevent buckles and waves occurring as you stitch because you have an even amount of fabric to ease together in each quarter of the length of the quilt

  7. Press seams towards the borders.

  8. Measure, cut and apply horizontal borders in same manner. This time including the vertical borders when measuring the quilt.

  9. If using several borders in the butted "T" method put number one border on all  edges before adding border number two etc

  10. When making multiple borders always work in the same order each time so that all the “T” joins face same way on each corner.

 

Back to top of page

Go to Mitred border

Back to Machine Quilting

Home


Disclaimer:
We have tried to assure the accuracy of information on this website so please let us know if something needs to be corrected or if you have any questions relating to an individual product, pattern or information displayed. Although every effort has been made to give all information in clear, concise and understandable terms, some errors may occur. Read about our privacy and other business policies.

If you have any questions about this web site, or find any errors, please contact  the Webmaster  

Copyright © 2000 Always Quilting   
Last modified: 19 September 2009
This web site is hosted by Webarama


Proud to be an Australian Website